Edge Glued COMPONENTS is a high quality, semi-finished door frame component, edge glued from two pieces of solid European Beech (Fagus sylvatica).
Production of solid door frames requires rather expensive raw material, that supplies long lengths.
To get to a semi-finished door component still significant work steps are required, which involve a waste factor of the expensive raw material.
Even when this is done, a part of the finished components may warp, twist or cup, which will result in even more work steps and waste.
The result: high-cost door frames.
Pollmeier Edge Glued COMPONENTS door frames are ready-to use, perfectly tailored to the production of interior door frames.
With our product you cut off work steps and reduce a lot of waste. Edge Glued COMPONENTS door frames have no warp and no twist and are free of defects in the visible area–guaranteed quality for every single piece.
The result: cost-efficient door frames in high-quality.
We provide Pollmeier
in the following dimensions
sortings | thickness [mm]* | width [mm]* | length [mm]* |
---|---|---|---|
AAX | 38 (sanded 36), | 136, 160, 180, 200, 225, 250 | 1,200, 2,250, 2,400** |
* Thickness: ± 0.3 mm | Widths: ± 0.5 mm | Lengths: ± 1 mm per meter
** Other lengths on request
For architraves and lippings dimensions, please check our cut to size info: https://www.pollmeier.com/components/
Want to know more about our products or do you have a question?